Laying artificial turf can seem challenging at first glance, but using the right tools, following the right instructions and exercising patience can automatically change the appearance of your garden.
In this DIY Guide, we’ll be looking at how you can efficiently lay synthetic grass in your home or garden.
Why Should You Choose Synthetic Grass?
If you are looking for a low-maintenance lawn, then fake grass is a smart choice.
This is because once you have it, you won’t have to bother about mowing, watering, or fertilizing, because your lawn will always be looking green.
Also, it is also eco-friendly, you get to reduce water usage and it is a great idea to use in areas where natural grass struggles to grow.
How Can You Prepare For Your Synthetic Grass Installation
- Assess the Area: First thing first, you need to inspect your garden to be sure it can fit in. Make sure that where you want to place it has adequate drainage, then remove any excess weeds or debris. If you are looking to put it in a smaller area or a balcony, the approach may be different because there’s more focus on aesthetics.
- Clear the Ground: If you have an existing lawn, remove it pave or deck to create a clean place for your new artificial grass.
- Weed Prevention: Another thing to consider here is installing a layer of weed membrane at the beginning. This will serve as a protective barrier to prevent unwanted plants from finding their way to the space for your artificial grass.
Laying the Foundation – Artificial Turf on Concrete and More
- Sand and Stone Base: What you should do here is lay your artificial lawn on a sharp sand and stone base. This is a popular method and it is done to get a smooth and level surface versus using artificial turf on soil. It is similar to installing synthetic grass on gravel
- Timber Perimeter: It is also recommended to close the areas for your artificial grass with timber and knock it down to ground level. This is meant to provide a boundary for the grass and also keep the structure in place.
- Installing on Concrete: If your area is already concrete, there’s no need to do it again. Installing artificial grass on concrete also ensures it is even and drains water the right way.
Lay Synthetic Grass – Install Your Artificial Lawn Perfectly
- Sourcing Quality Grass: When you want to buy your artificial turf, get the one with high quality for longevity. The price may be different depending on the size and type of grass fibres you want, but remember, getting a cheaper one isn’t always better.
- Laying the Grass: Before you start rolling out the grass, you can consider putting another layer of weed membrane to increase the level of protection. The weed will protect the underside of your artificial grass.
- Cutting and Adjusting: After laying the grass you’ll have to cut it and adjust it to the area until you get the desired results. This stage requires precision to ensure the grass fits well, especially around the edges and corners before you use artificial grass adhesive to stick it in place. You can piece bits together with a turf cutter and joining tape.
Caring for Your Artificial Lawn
Even though artificial turf requires only minimal maintenance, it is still important that you care for it to increase its lifespan.
- Cleaning: You can brush the grass it every now and then, to keep the blades looking upright and fresh.
- Avoiding Heat: Be careful with placing hot objects like barbecues or outdoor heaters directly on the grass because it may damage or melt the fibers.
- Protect Against Weeds: Always be on the lookout for weeds at the edges because even with a weed membrane, it is possible that some stubborn plants will still pop up.
Finally, laying artificial turf is a great step to rejuvenating your outdoor space. Once you follow the guidelines above and you allow the grass to settle, you’ll have a lawn that’s not only beautiful but also long-lasting with low maintenance.